======================================================
License Agreement
======================================================

1. PROPRIETARY RIGHTS: Title, ownership rights, and intellectual
   property rights in the SOFTWARE shall remain in Fuji Xerox and its
   third party suppliers.  You have no rights in the SOFTWARE except
   as expressly granted in accordance with this agreement.
   
2. LICENSE:  Under this agreement, you are granted a non-exclusive
   license to use the SOFTWARE for the purpose of using with
   compatible Fuji Xerox products in your country.  You are
   not permitted to (1) assign, sublicense, sell, rent, lease, convey,
   or transfer the SOFTWARE to any third party by any tangible media
   such as floppy disk, magnetic tape, or CD-ROM, (2) distribute the
   SOFTWARE on a network or by a telephone line available to the
   public or (3) alter, modify, decompile, disassemble, reverse
   engineer, or create derivative works based on the whole or any
   part of the SOFTWARE.
   If any direction on usage or restriction for the SOFTWARE is
   expressly specified in this web site, you are required to follow
   such direction. 
   
3. TERM: This agreement is effective upon installing the SOFTWARE
   until you terminate the agreement by destroying the SOFTWARE.
   This agreement will also terminate if you fail to abide by any
   terms of this agreement.  In case of termination, you must
   promptly destroy the SOFTWARE.
   
4. LIMITED WARRANTIES: THE SOFTWARE IS SUPPLIED STRICTLY ON AN 'AS IS'
   BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR
   FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE.
   YOU ARE RESPONSIBLE FOR CHOOSING, MAINTAINING AND MATCHING OTHER
   HARDWARE AND SOFTWARE COMPONENTS IN COMBINATION OF THE SOFTWARE.
   IN NO EVENT, SHALL FUJI XEROX, FUJI XEROX CHANNEL PARTNERS,
   AUTHORIZED DEALERS AND THEIR THIRD PARTY SUPPLIERS BE LIABLE FOR
   ANY LOSS OR DAMAGE INCLUDING INCIDENTAL OR CONSEQUENTIAL LOSS OR
   DAMAGE, ARISING FROM USE OF OR INABILITY TO USE SOFTWARE, OR ANY
   MODIFICATION OF THE SOFTWARE.  
   
5. EXPORT CONTROL: You are not allowed to export the SOFTWARE in part
   or whole, directly or indirectly, in violation of any restrictions,
   laws or regulations imposed by the government of your country or
   any other relevant countries, and are required to obtain necessary
   approval prior to exporting the SOFTWARE.

===============================================================================
PCL 6 Print Driver Ver.6.7.2 Additional Information
===============================================================================

This document provides information about the print driver on the 
following items:

  1. Target Hardware Products
  2. Requirements
  3. General Comments
  4. Limitations
  5. Software Update

1. Target Hardware Products
===================================================
FUJI XEROX DocuCentre SC2020

2. Requirements
===============

Please note that this print driver operates on a computer with a
64-bit x64-based microprocessor (AMD64 or Intel EM64T) and an
upward-compatible processor, running 

  Microsoft(R) Windows(R) XP Professional x64 Edition
  Microsoft(R) Windows Server(R) 2003 x64 Editions
  Microsoft(R) Windows Vista(R) x64 Editions
  Microsoft(R) Windows Server(R) 2008 x64 Editions
  Microsoft(R) Windows(R) 7 x64 Editions
  Microsoft(R) Windows Server(R) 2008 R2
  Microsoft(R) Windows(R) 8 x64 Editions
  Microsoft(R) Windows Server(R) 2012
  Microsoft(R) Windows(R) 8.1 x64 Editions
  Microsoft(R) Windows Server(R) 2012 R2

3. General Comments
===================

*   Close all the running applications before installing the printer
    driver.

*   Always reboot the computer after installing an upgraded version of
    the print driver.

*   If you have deleted an older version of the print driver,
    always reboot the computer before installing the new version.

*   Some applications provide printing options pertaining to the
    number of copies and collated copies.  Always select the printing
    options in the application unless the instructions specify
    otherwise. Use the print driver dialogs to select advanced
    options such as 2 Sided Print, Sample Set or options that are
    not available in the application.

*   Always close the print driver dialogs and/or the application
    Print dialog box before you make any changes to the default
    settings of the print driver via the Control Panel.

*   For the installation through the networks on Windows Vista,
     if you right-click on [Printer] folder, go to "Run as administrator" 
     from the menu and select [Add printer...], printer icon may not be generated.

*   Rename a Printer Icon should comply OS file naming convention. Use Symbols or 
     special characters may incur renaming error or unexpected print driver behavior.

*   Before installing a print driver in the Windows cluster environment, you need
     to install it on each node in the cluster.


4. Limitations
==============

*   When a printed pattern or diagram is different from what you see
    on the screen, changing the following settings may alleviate the
    problem.

    * Change the "Image Quality" setting on the "Color Options" tab.
    * Change the "Image Types" and the "Image Auto Correction" settings 
      on the "Color Options" tab.
    * Set "High Speed Image Processing" on the "Advanced" tab to "Off".
    * Set "Draw the pattern with fine lines as per the resolution"
      on the "Advanced" tab to "On".
    * Change the "Resolution" setting in the "Image Options" group on the
      "Advanced" tab.
    * Change the "Halftone Print" setting in the "Image Options"
      group on the "Advanced" tab.

*   The print layout may be changed when you change the "Image Quality"
    in the "Color Options" tab.

*   Depending on the application, if the resolution of the driver
    is high, the size of the print data may become huge and printing
    cannot be done properly. When this happens, specify the following
    settings:

    * Specify the "Resolution" in the "Image Options" group in
      the "Advanced" tab to "300dpi" or "200dpi".

*   When doing a print job by specifying Paper Source as Auto, be
    sure to set Paper Size in the application to the Paper Size that
    the driver supports to enable the automatic paper feed feature.

*   When using the Form Overlay feature, use form data of the same
    Paper Size, Resolution, and Image Settings as those of the
    document you want to print.  If these settings are different
    between form data and the page where the form data is incorporated,
    expected print results may not be obtained.


5. Software Update
==================
    The latest software is available on our web site.

        http://www.fxap.com.sg/

    Communication charges will be borne by the customer.


Portions of this software are based in part on the work of the
Independent JPEG Group.

Microsoft is the registered trademark of Microsoft Incorporated.
Windows is the registered trademark of Microsoft Incorporated.
Other names of products and companies are the trademarks or
registered trademarks of each company.
(C) Fuji Xerox Co., Ltd. 2014
----------------------------< End of File >--------------------------

